Automated Real Estate Software – The New Trend in Investing

The value of real estate has appreciated in the last few years. It also shows great potential for growth. Hence, now might be the best time to look at an investment in property. However, if you’ve spoken to someone who already has his knees deep in real estate investing, you will realize that a lot of things are easier said than done.

It requires skill and experience to scour the market for high value properties.

Then comes landing good buyers.

Finally, there’s a humongous amount of paper work to handle.

This is where real estate investing softwares might lend a hand. They automate the entire process of real estate investing. If you would like to know more about such applications, here’s a low down on some of the common features they offer.

Lead generation –

At the click of a single button you are able to find a comprehensive list of buyers and sellers scattered across the country. The information elicited includes names and mail addresses of buyers, owners of properties, the type of property (bank owned, foreclosed, low and high equity, absentee owner etc.) and amount of cash paid.

Website creation –

Every business needs a website, especially if you do not have a physical location from which operate. Not all of us know the technicalities of writing HTML codes and designing a website. The real estate softwares can help you create targeted and user-friendly websites that you can use to showcase your business.

Direct mail generator –

Marketing is the soul of a real estate business. The more you network the more leads you can generate. The direct mail generator feature helps you setup a highly productive and efficient mailing system. You can send out emails, newsletters, posters and flyers.

There are a range of pre-made email templates you can use to send out messages to your leads. Autoresponders make sure you can keep in touch with sellers and buyers even when you are not physically present to answer their queries.

This feature is a highlight feature of most real estate software given that the savings in time and money are large.

Investing tips –

This is a section that most newbies can benefit from. Most applications include a resource library with info on the basic aspects of the trade. An open community of members can also give you an opportunity to interact and build your resource with real-time knowledge about making, building and closing a deal.

Diverse user base –

Modern-day automated real estate investing software applications cater to a varied group of investors. It includes those who buy, fix and flip properties. If you are a landlord, it can increase the convenience of managing your properties including finding tenants and repairing and renovating properties between subsequent deals. There are also features that rehabbers and builders of new constructions can use.

Contracts and paperwork –

Real estate investment also means a lot of paperwork. Most applications offer tools to generate contracts. Features such as auto-fill enable you to fill personal details into letters, contracts and other property-related documents. You can sign them online, and then email or fax them free of charge.

There is one thing – you need to be realistic. Real estate softwares are tools you can use to streamline your business. You should have a real estate business to start with and some basic know-how on investing.

Posted in general | Comments Off on Automated Real Estate Software – The New Trend in Investing

What is the Argus Safety Database?

The Argus safety database is a key part of the Argus Safety 3.0.1 pharmacovigilance software system. In a nutshell, pharmacovigilance is defined as the monitoring of any possible adverse effects of both herbal remedies and synthetic drugs as they are used.

The digital database is used to help companies ensure compliance with global regulations regarding pharmacovigilance and related activities. As a comprehensive pharmaceutical software system, it supports pharmacovigilance business processes that take place in both the pre- and post-marketing phases.

The Argus database is hosted in a data center that is ISO-9001-certified, and operates according to the security standards promulgated by FDA guidelines. By managing this data center, a pharmaceutical firm or laboratory may obtain maximum physical data security as well as access to effective data backup and recovery procedures whenever these services are needed.

ACCOVION, the full-service contract research organization that offers pharmacovigilance as a core service, has configured the Argus database with customized and validated rules to expedite safety reporting. This setup enables generated safety reports to be sent to regulatory investigators and central ethics committees.

The system covers a wide range of the most commonly used forms, including the American FDA MedWatch 3500A form for drugs, the VAERS form for vaccines, the CIOMS-I form, and many others utilized in European countries.

The standard setup in use by the Argus safety database system includes coding with current World Health Organization and MedDRA data dictionaries, as well as older versions of these dictionaries and many others to meet user requirements.

Posted in general | Comments Off on What is the Argus Safety Database?

Benefits of an Android TV Box

The Android TV box is a useful piece of kit that connects to the TV via the HDMI port to offer most of the features of Android. This type of set up is very flexible and easily connects to most TVs with the right port and is a lot cheaper than a smart TV. Here are a few of the benefits of using the Android TV box:

Endless apps

One of the most appreciated benefits is the ability to use and install the endless apps that are now available on the Android operating system. By visiting the Google Play store using the internet connection, it is possible to install the latest apps related to not only multimedia content, but also audio editing applications, games, books, magazines, sending email, or signing into social media accounts, such as Facebook and Twitter.

TV support

By connecting the Android TV box to the TV at home via the internet; It is also possible to connect to other devices in the home, such as those that make use of technologies like Airplay, Miracast, DLNA, or others that function with Android. This makes it very flexible to share various types of multimedia with the TV. For instance, it is possible for an Android compatible tablet or smartphone to interact and control the TV while also giving the option to share files with a laptop or even watch a downloaded series or a movie on the large screen. Overall, this type of setup gives a simple gateway to get the internet on the TV.

Great price

The cost of upgrading a standard TV to benefit from all the possibilities of Android is relatively cheap compared to buying a smart TV. Plus, the combined standard TV and Android TV box can offer a lot more than a standard smart TV.

Regular updates

The Android operating system is updated on a regular basis, which means the latest version of a game, application, or system is always available. Plus, this is usually done automatically so there is no need to keep searching for updates when logged into the app store. This is significantly more convenient than a smart TV which can take a while to receive updates, especially when every brand of TV needs to have its own update created and released.

All in all, the Android TV Box makes it possible to enjoy the connectivity and versatility of Android on a standard TV set up.

Posted in general | Comments Off on Benefits of an Android TV Box

Advantages and Disadvantages of Professional Shopping Cart Software

Advantages & Disadvantages of professional shopping cart software As e-Commerce is becoming a regular technique in the business industry it appears that more and more software development firms are developing professional shopping cart software to be released in the market. There is currently a huge range of free shopping cart software that has been released, and it seems that most e-Commerce website owners prefer these free systems over paid for professional shopping cart software. In this article we are going to look at the advantages and disadvantages of professional shopping cart software.

Advantages

• Even though you will have to pay for the solution, you get a cart package that has been fully developed, tested and used in the real working world by other e-Commerce websites. If the solution is used by a popular website service then the chances are it has been under more than enough testing to be deemed ready for use.

• Professional shopping cart software will be supported by the people who developed it. A lot of free solutions out there are simply developed and then discontinued as the freelance developers move onto their next project. Support is essential if you are going to want upgrades as mentioned in our next point.

• As the system is supported, the development team are likely to fix any bugs that may occur and provide patches and security fixes. This means the shopping cart software will only get better as time goes on and furthermore improve your e-Commerce website.

• Your site is likely to be more secure when using a professional software solution as in most cases the it developed house private content management systems. This improves security as public content management systems such as WordPress are constantly under threat from hackers as they try to compromise the free source code.

• Another huge advantage of using professionally developed software in e-Commerce is that they will already support a huge range of different payment options for your customers. There are various carts – that only offer PayPal for payment by standard, and it can take a very long time to find plug-ins or figure out how to add other methods yourself. With professional software you can save time and possibly money as it is all included.

Disadvantages

• Your e-Commerce venture might be a small time project and professional cart does cost money which you may not have. In this case you may have to make do with a free shopping cart solution. The good part of conducting business online is that after you have made profit with the free system you can reinvest your money to buy a professional package.

• You trust the developers to do everything they promise to ensure the best experience. It might be slightly difficult to use at first and you might have to spend some time getting used to the bespoke system. You also have to understand that you are vulnerable until patches are made if a security flaw is found.

Posted in general | Comments Off on Advantages and Disadvantages of Professional Shopping Cart Software

The Advantages and Disadvantages to Bug Tracking Software

Bug tracking has been around as early as the 1940’s, just not in a software form. In these early days, simply using a pen and a paper created tracking systems. It evolved from then to using spreadsheets. Now there is bug tracking software like the defect tracking tool and even more specific programs like Mantis and Bugzilla, just to name a couple. As with anything that evolves however, there will always be those that are 100% for the programs and those that are against it. This article will cover all claims – both positive and negative – of bug tracking software like the defect tracking tool.

The Positive Claims

It certainly depends on the type of bug tracking software that is used, but it seems as if there are many more advantages to these tools than disadvantages. The most obvious advantage is that these types of tools allow companies to keep a record of the issues that are recorded, who fixed them, and even how long it took to fix the issue for some types of programs. Customers are encouraged to be as detailed as they can be when requesting that an issue be fixed so that companies can complete their requests as quickly as possible. The fact that the issues are recorded and saved is a huge benefit for the companies because sending the recorded bug list with the purchased software is a common practice. This is a benefit to customers because if it is a common error, they can simply look up this issue in the previously recorded bug list. However, if the list is incredibly long (a common disadvantage) it can become more of a hassle.

The Negative Claims

As with anything that has a list of positive aspects there is also a list of negative aspects, though there are few. One of the biggest complaints is not so much from the bug tracking software or defect tracking tool itself but more from the process of submitting issue requests. Customers need to be extremely detailed with their issue requests if they want a detailed response. Miscommunication isn’t a fault of the product, the customer, or the company – it’s simply something that happens. Customers and companies alike both need to remember to be patient with each other and to treat each other with a mutual respect. A second complaint that was previously mentioned is the length of issues in some of these software programs.

Some customers don’t have the patience to look through a long list of software issues that have been previously recorded and this causes frustration among the companies that took the time to purchase software that saves them. The length of issues that are submitted can also become a problem because if there are too many issues submitted and not enough engineers to address them, some can get overlooked. Nobody likes to be forgotten, but usually these types of bug tracking software include detailed instructions and are easy to use.

Usually when a company purchases a bug tracking software or defect tracking tool it already has an experienced IT department in place. Whatever the software is that is being used with these programs should have some sort of backup for when the work is completed so it does not get lost if the issues that occur are deadly.

Posted in general | Comments Off on The Advantages and Disadvantages to Bug Tracking Software

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Microsoft Access and Medical Private Practice

For physicians medical office software installation could be nerve-wracking, not because they want to avoid electronic medical records, but because the majority of the software packages are too complicated and very expensive for them.

The good news is, you can make your medical office software system uncomplicated and relatively easily maintained with one of the popular database software packages being used today, the Microsoft Access.

Microsoft Access is a relational database system developed by Microsoft. Microsoft Access is one of the easiest and most flexible database management solutions for the medical office and provides data validation and user-friendly features on data entry screens. It has been the dominant lightweight database system used for the last decade and has continued to grow with additional features. Access is a productive and very customizable solution for small medical practices and comes with MS Office (or standalone). However the next step up in a medical environment would be MS SQL Server but small medical offices usually only has need of a lightweight application and the added functionality with MS SQL Server, comes with a heavy price.

With this relational database system you can be up and running in one hour, which means that it is not necessary for your practice to spend lot of money to purchase, configure, update and maintain an SQL Server solution. Microsoft Access includes without any additional costs, points of integration with popular software packages including: Microsoft Word, Excel & Outlook and provides a free runtime version.

MS Access network setup is very easy. A medical office with 2-8 users is up and running within ten minutes, while installation and application maintenance is extremely simple. Virtually any user with a basic knowledge of Microsoft Access can handle all maintenance procedures without the assistance of IT personnel.

Keep also in mind that SQL Server is the flagship database system from Microsoft and it is suitable for use in environments with up to thousands of users. Microsoft Access can handle 2- 8 users and it is limited to 2 GB data storage.

We are convinced that the best way for private medical offices around the world to enter the world of electronic medical records is to purchase a professionally designed but inexpensive and affordable Microsoft Access based software solution.

Posted in general | Comments Off on Microsoft Access and Medical Private Practice

Advantages to Android Game Development

The industry of mobile game development has introduced a very important aspect to the market – the ability to conceptualize, develop, and release video games on devices with far more success and ease than ever before. And with the Android app marketplace only requiring a one-time fee for submitting an application, the cost becomes almost negligible to put the product out for millions of customers to find. Even the submission process is drastically shorter than on most other smartphones, as the app regulation is far more lenient for the Android OS.

Another drawing point for developing games on Android devices is the programming language featured- Java. Java has long been one of the most popular programming languages ​​for video game developers, and that makes it extremely easy for the average programmer to pick up Android development for the first time. Compared to most other mobile platforms, which usually sport modified or newly invented languages, the learning curve is decreed to nearly nothing, so a new developer can complete a game in a fraction of the time.

Another unique aspect to Android game development is the lack of standardization in the droid phone family. As the Android OS is not licensed to a single mobile phone making company, the phones themselves can vary to an extreme degree in terms of features and hardware specifications. While one device may have a fully functional A-GPS and HDMI video compatibility, another may have a QWERTY keyboard and no GPS at all. While this is certainly appealing to some developers, as they are likely to find a phone that will meet their hardware needs reasonably, it will also restrict the potential audience, as some phones will not be able to support the more complex applications.

When the game development process has finally reached the point where it can be released to the public, the developer is presented with yet another choice- which market would the game be most visible in? Unlike the iOS, there are numerous marketplaces and app stores for Android phones, each one with it's own advantages and disadvantages. From the basic Android marketplace, built to only display the apps compatible with the phone currently being used, to the Amazon app store, which offers a different free app every day, the myriad of marketing strategies can be almost daunting, which makes it all the More useful that an application can almost always be entered into multiple marketplaces without issue. However, whenever it makes sense to spread attention across several different fields is another question entirely.

The Android game development process overall really gives the most variety on the smartphone market. From start to finish, strategies can be hand-tailored to the developer's desires, making the game as close to the original concept as currently possible. While the audience may not be as large as that of iPhone users, the Android presents itself as a strong contender, purely through its accessibility. And with the largest variety of smartphones on the current market, the possibilities for development are inexhaustible, and continued releases can only add to the capabilities the platform has to offer.

Posted in general | Comments Off on Advantages to Android Game Development

7 Benefits of the Doctor and Clinic Management System Software

A cloud-based clinic management system addresses your hospital management related woes. It brings simplicity to the patient appointments, their treatment, medical billing and payments and services that take care of other requirements of the hospital.

Advantages of a Cloud Compliant Software

A software that leverages the cloud technologies in full, offers flexibility, cost saving, fast service, ease of accessibility and sustainability.

Flexibility

Even small hospitals can harness the power of this type of software. As the business grows, the software automatically scales itself to the hospital’s increasing needs without the user having to provide for it. The software is easy use, at its fullest, right from the first day.

Cost Saving

Choosing to use clinic management software located on the cloud platform is cost effective for the hospitals. It is an attractive choice for the small as well as big hospital setups.

It requires no expenditure on hardware, equipments and trained IT staff. These are the resources that a hospital, supporting an in-house IT setup must utilize. They are costly.

This highly optimized software is maintained, updated and configured in the cloud by the skilled IT experts. The users are, thus, spared from the burden. It leads to cost saving. Unhindered, the hospital staff stays focused on the core functions of the hospital.

Harness it From Anywhere at Anytime

The hospital administrator acts as the super-user of the software. He or she, then, grant access permissions to the others. The managers, doctors and others can then access the necessary data stored in the cloud, from anywhere at anytime.

They can use smartphones, tablets, phablets, laptops, notebooks and desktops over the internet for the purpose.

Fast Service

This software gives fast, easy and simple solutions for the hospitals in managing their day-to-day activities. It helps in streamlining patient management, inventory management, employees’ and doctors’ attendance, online report generation and other tasks.

Sustainability

For hospitals using this software, it is easy to recover from an on-site disaster. Their data is stored in the cloud, where it remains safe. It is repeatedly backed up. They need to simply access it to get their system online.

Features of the Cloud Based Clinic Management System

1. Patient management: Maintains records of the patients that include personal details, visits to the hospitals, allergy related data, medication, etc.

2. Appointments and schedule management: Determines the availability of the doctors before scheduling appointments. Uses powerful search engine to set up an appointment for the patient. The software assists the staff in knowing the availability of the beds for the patient’s hospital stay.

3. Alerts: Sends alerts and reminders using SMSs and Emails. It notifies the patients about the future appointments and vaccination schedules.

4. Purchase and inventory management: Keeps track of the drugs, equipments, instruments and other hospital items in the stock. Generate expiry alerts for the drugs in stock. Assists in creating a purchase list.

5. Records: Stores all the electronic medical records of the patients and the data related to the hospital, in a central place. It is available to the authorized persons from anywhere, at any time. Doctors can use the patient data to conduct medical research.

6. Payment Processing: Assists the hospital’s accounting department in, accurate medical billing to the patient. Provides connectivity to the top accounting software and eases the tasks of accountants.

7. Lead Generation: It assists the business managers employed by the hospitals in lead generation and tracking.

It is easy to start using a cloud-based clinic management system software. It needs no installation and one can access and start using it over the internet, in a jiffy.

Posted in general | Comments Off on 7 Benefits of the Doctor and Clinic Management System Software

The Importance Of Excel In The Workplace

Excel is perhaps the most important computer software program used in the workplace today. That’s why so many workers and prospective employees are required to learn Excel in order to enter or remain in the workplace.

From the viewpoint of the employer, particularly those in the field of information systems, the use of Excel as an end-user computing tool is essential. Not only are many business professionals using Excel to perform everyday functional tasks in the workplace, an increasing number of employers rely on Excel for decision support.

In general, Excel dominates the spreadsheet product industry with a market share estimated at 90 percent. Excel 2007 has the capacity for spreadsheets of up to a million rows by 16,000 columns, enabling the user to import and work with massive amounts of data and achieve faster calculation performance than ever before.

Outside the workplace, Excel is in broad use for everyday problem solving.

Let’s say you have a home office. You can use Excel to calculate sales tax on a purchase, calculate the cost of a trip by car, create a temperature converter, calculate the price of pizza per square inch and do analysis of inputted data. You can track your debt, income and assets, determine your debt to income ratio, calculate your net worth, and use this information to prepare for the process of applying for a mortgage on a new house. The personal uses for Excel are almost as endless as the business uses for this software – and an Excel tutorial delves into the practical uses of the program for personal and business use.

The use of spreadsheets on computers is not new. Spreadsheets, in electronic form, have been in existence since before the introduction of the personal computer. Forerunners to Excel and Lotus 1-2-3 were packages such as VisiCalc, developed and modeled on the accountant’s financial ledger. Since 1987, spreadsheet programs have been impacting the business world. Along the way, computerized spreadsheets have become a pervasive and increasingly effective tool for comparative data analysis throughout the world.

Today, end users employ Excel to create and modify spreadsheets as well as to author web pages with links and complex formatting specifications. They create macros and scripts. While some of these programs are small, one-shot calculations, many are much more critical and affect significant financial decisions and business transactions.

Widely used by businesses, service agencies, volunteer groups, private sector organizations, scientists, students, educators, trainers, researchers, journalists, accountants and others, Microsoft Excel has become a staple of end users and business professionals.

The beauty of Excel is that it can be used as a receiver of workplace or business data, or as a calculator, a decision support tool, a data converter or even a display spreadsheet for information interpretation. Excel can create a chart or graph, operate in conjunction with Mail Merge functions, import data from the Internet, create a concept map and sequentially rank information by importance.

Excel offers new data analysis and visualization tools that assist in analyzing information, spotting trends and accessing information more easily than in the past. Using conditional formatting with rich data display schemes, you can evaluate and illustrate important trends and highlight exceptions with colored gradients, data bars and icons.

Indeed, Excel can be customized to perform such a wide variety of functions that many businesses can’t operate without it. Excel training has become mandatory in many workplaces; in fact, computer software training is a must for any workplace trying to keep up with the times.

Let’s say you’re an employer with 97 workers, 17 of whom called in sick today, and you want to know the percentage represented by absentees. Excel can do that. You can learn Excel and use it to determine the ratio of male to female employees, the percentage of minorities on the payroll, and the ranking of each worker by compensation package amount, including the percentages of that package according to pay and benefits. You can use Excel to keep track of production by department, information that may assist you in future development plans. You can create additional spreadsheets to track data on vendors and customers while maintaining an ongoing inventory of product stock.

Let’s say you want to know your business production versus cost. You don’t have to be a math wiz – you just have to learn Excel. Excel allows you to input all of the data, analyze it, sort it according to your customized format, and display the results with color, shading, backgrounds, icons and other gimmicks that offer time-saving assistance in later locating precisely the information desired. If this spreadsheet is for presentation purposes, Excel helps you put it together in such a visually appealing way that the data may seem to pop and sparkle.

The single most important thing an employer may do is learn Excel – it is one of the most essential tools of the workplace.

Excel and Microsoft are trademarks of Microsoft Corporation, registered in the U.S. and other countries. Lotus is a registered trademark of International Business Machines Corporation in the U.S. and/or other countries.

Posted in general | Comments Off on The Importance Of Excel In The Workplace